Taki Da 07 TATTOO Large Stamping Plate with Demo Film

- [ ] 
The size of the mold is 10*15 cm
Important! The engraving must be absolutely clean and dry before each varnish application.
A selection of space themed designs
More works with the plate on Instagram using the hashtag #takida_yazvezda
HOW TO USE 
1. Remove the protective film from the board 
2. Clean the board with acetone (oil-free acetone nail polish remover/gel). Important! The engraving must be absolutely clean and dry before each varnish application. 
3. Prepare the stamp. We only clean the stamp with a dry method (sticky roller or adhesive tape) 
4. Apply stamping varnish to the selected pattern 
5. With a squeegee at an angle of 45 degrees (1/2 of a right angle), remove the excess varnish in one movement 
6. Quickly rotate without pressure to print the pattern on the stamp (1-2 seconds) 
7. Transfer the design to the nail.
If you're working slowly and the polish has time to dry on the stamp, use an acid-free primer or bond to create a tacky ridge on the nail
Watch a detailed video lesson for beginners STAMPING EASY on Google