Sparkles Gel C10 TP Nails

It is a glitter gel with various shades and reflections and is recommended for design.
Design gel with a slightly fluid texture, pigmented, with perfect coverage and easy application. Sparkles Gel TPNails can be applied on: base coat, rubber, gel, polygel, etc. It is recommended for both professional use and home application. Resistance on nails: up to 6 weeks!
It is polymerized in the lamp as follows:
UV: 2-3 minute;
LED: 30-60 seconds.
APPLICATION METHOD:
Prepare natural nails by lightly filing the polish with a  medium-grit  file or fine buffer  , then degrease with Cleaner.
Apply  Base Coat ,  Rubber Base or gel/polygel and cure for 30 sec.- 60 sec. – LED or 60 sec. – 120 sec. – UV.
Create your favorite design or apply a layer of Sparkles Gel TPNails by Tanya Povenskaya, cure 60 sec. – LED or 2 min. – UV. Apply a second layer, if needed, then cure.
Apply a layer of Top ( Shiny ,  No Wipe ,  Crystal ,  etc. ), cure for 60 sec. – LED or 90 sec. – UV.
NOTE: For better resistance, we recommend filing the free edge of the nail with a file (this will prevent chipping at the tip).
REMOVAL METHOD:
Using a  buffer or a  240 or 180 grit file  , remove the gloss.
Apply a pad soaked in Remover/pure Acetone solution to the nail and wrap the nail with aluminum foil, wait 10-15 minutes.
It is removed by gently pushing with a wooden stick or spatula.
or
For designs created on gel/polygel, it can be professionally removed using a  milling cutter.(yellow, red, blue).