Gel-X Tips Base 8ml Patrisa Nail

The base for tips is an ideal base due to its characteristics! 
-  It will ensure the perfect adhesion of the nail plate and gel tips;
– Thick consistency and high viscosity – will allow you to work comfortably, the base will not flow quickly under the sides and cuticle area; 
- Sure - it has a composition of 9FREE, which means that the occurrence of allergic reactions is excluded as much as possible!
Extension technology with gel tips: 
1. Perform a standard manicure procedure. 
2. Prepare the natural nail plate, degrease with cleaner and a lint-free napkin, apply Nail prep and Patrisa Nail Primer 
3. Raise the tips for the size of the nail. 
4. Matt the tip from the inside (with a cutter end). 
5. Remove excess dust with a brush (If you wipe with a large amount of degreaser, the tips may be damaged). If you need the transparency of the vertices for a particular design, then it is better not to erase the surface at all )
6. Apply a gel tip base to the base of the tips, creating a small drop (There should not be too much material so that the excess does not flow out; and it should not be too little, because the tips should be in contact with the entire surface of the nail plate) 
7. Stepping back about 2 mm from the cuticle, attach the base of the tips with the lunula material at a 45 degree angle. Gently press the tips towards the free edge. 
8. While still holding the tip in the gel, dry in the lamp for about 10 seconds to fix it in the desired position. Then, stopping holding, dry for about 20 seconds. 
9. Remove excess material with a carbide/ceramic bur or file.
10. Level with Kombigel, base/gel/kombi liquid gel. 
11. Then proceed to the subsequent coating: cover with semi-permanent nail polish, finish, design.
!How to use: gel tips should be applied to the "bare nail". If there was a coating on the nails before forming with gel tips, it must be completely removed. Otherwise, this can lead to gaps, and then they can come off.